TSL806 Ingrandisci

TSL806

Teleskop Service

TS-Optics Guiding Scope 80/600 mm with adjustable tube rings

Maggiori dettagli

TSL806

Disponibilità 1-2 settimane+ tempo di trasporto

o·o·o

203,00 € 203 EUR 2025-01-21

» Aggiungi alla mia lista dei desideri

Codice articolo: TSL806

Fast guiding scope and super finder with 80 mm aperture and 600 mm focal length - perfectly suitable for autoguiding

♦ The TSL806 guiding scope allows accurate guiding of telescopes up to 12" aperture with a suitable autoguider

♦ The longer focal length allows guiding with autoguiders which have somewhat less resolution

♦ Compact model and with less than 2 kg weight easily to mount

♦ Focuser, tube and adjustable tube rings are solidly built

♦ The focuser can be locked

♦ The focuser offers 1.25" receptacle and T2 thread for screwed adaptions

♦ Sufficient working distance for all common autoguiders

♦ Can also be used light-gathering finder

 TS-Optics Guiding Scope 80/600 mm with adjustable tube rings [EN]

80 mm f/7.5 Guiding Scope and Finder with adjustable tube rings
A true high-end solution for all astrophotographers is this guide scope. The telescope convinces with a tack-sharp image and finely defined stars. Due to the moderate focal ratio, the chromatic aperration is minimal, which increases the sharpness even more. Thus maximum guiding accuracy is guaranteed. Adjustable high-quality tube rings offer good support and allow neat guiding even over longer periods.

The advantages of the 80/600 mm guiding scope:

♦ With its fast optics, the guiding scope is ideally suited for high-resolution autoguiders.
♦ Compact dimensions and less than 2 kg weight allow attaching the telescope even to smaller mounts.
♦ The focuser has a locking screw and allows 1.25" and T2 connection.
♦ Simple adaption to any dovetail bar. The rings have a flat support surface and are mounted with standard M6 screws.

Connecting autoguider cameras & crosshair eyepieces:
For getting into focus with a croshair eyepiece, you need a 1.25" star diagonal (see accessory recommendations). The same applies to webcams with 1.25" connection.

For using a CCD camera with T2 connection or an autoguider like the ALCCD5, M-Gen or the LVI Smart Guider, you need 2x 40mm T2 extension (TST2V40). With this, you can focus the camera. The advantage: everything is screwed, not just pushed in - no wobbling, no tilting.

 TS-Optics Guiding Scope 80/600 mm with adjustable tube rings [EN]

Technical Data

Aperture:80 mm
Focal length:600 mm
Focal ratio:1/7.5
Focuser:1.25" focuser with T2 thread
Objective:Achromatic objective (2 element), fully multi-coated
Tube diameter:90 mm
Tube rings:Adjustable tube rings
Mounting:Flat support surfaces, each with 4x M6 thread (female)

 

In the Box

♦ 80 mm f7.5 Refractor
♦ Adjustable tube rings

Carrello  

Nessun prodotto

0,00 € Spedizione
0,00 € Totale

Carrello Check out

Contattaci