Newtonian Coma Corrector 0.95x Ingrandisci

Newtonian Coma Corrector 0.95x

Teleskop Service

TS-Optics NEWTONIAN Coma Corrector 0.95x Maxfield - 3-element - 2" connection

Maggiori dettagli

TSKomakorr

Disponibilità ultimo pezzoin consegna rapida

o·o·o

225,00 € 225 EUR 2025-01-21

» Aggiungi alla mia lista dei desideri

Codice articolo: TSKomakorr

  • The TS-Optics 2" MaxField Newtonian coma corrector is suitable for all Newtonian telescopes and provides outstanding correction on the axis and in the field.

    Suitable for Newtonian telescopes with focal ratios of f/6 to f/4
    Very good illumination of 35 mm due to short design and M48 thread connection - even suitable for full-frame size sensors
    Finer stars on the axis and in the field through the 3-element design
    Improves the focal ratio by the factor 0.95 - the telescope becomes faster
    The focus position is maintained
    2" filter thread at the telescope side
    Length only 72 mm for better illumination. The corrector does not protrude into the telescope tube
    55 mm working distance from the M48 thread - perfectly suitable for DSLR and astro cameras
    The corrector is screwable, the counter ring can be removed, adapters e.g. to M54 are available.

 TS-Optics NEWTONIAN Coma Corrector 0.95x Maxfield - 3-element - 2" connection [EN]

 

  • TS-Optics 2" MaxField Coma Corrector for Newtonian Telescopes - suitable for Cameras up to full frame size Sensors
    This Newtonian coma corrector combines the advantages of the short 2-element coma correctors with the outstanding field correction of the Wynne corrector and the GPU. The corrector is usable with any Newtonian with a 2" focuser. It provides 100% ilumination up to 35 mm diameter and 95% illumination up to 43 mm diameter, so the MaxField Coma Corrector is even suitable for cameras with full-frame size sensors.

 TS-Optics NEWTONIAN Coma Corrector 0.95x Maxfield - 3-element - 2" connection [EN]

 

 
The advantages of the 2" MaxField coma corrector over the short 2-element coma correctors:
The TS MaxField consists, like the Wynne correctors, of three lenses. The stars on the axis and in the field become finer and smaller than simple Ross correctors can provide. Especially the new astro cameras with very small pixels show the difference very clearly.
 

Furter features of the TS MaxField Coma Corrector:
Versatile - usable for photography and for observation with an optional 2" adapter
Flexible camera adaption with the M48x0.75 thread
M48 adapters for DSLR available
55 mm working distance - suitable for DSLR cameras and also for astro cameras like the ones from ZWO
Very good multi-coated optics for highest sharpness without distracting reflections
Reduces the focal length by the factor 0.95. The focal plane is not changed.
The corrector fits to any Newtonian with 2" focuser and a working distance of at least 60 mm. These prerequisites are fulfilled by almost all Newtonian telescopes on the market.

Use: Correction of the Newtonian coma
Suitable for: Newtonian telescopes f/4 and slower
Working distance: 55 mm from the M48x0.75 thread
2" filter thread: yes
Camera connection: M48x0.75 thread - length 4.5 mm
100% illumination: 35 mm
Usable field: fully corrected up to 45 mm and also well illuminated (93%)
Stop ring: 65 mm outer diameter, removable
Barrel size at the telescope side: 2"
Elements: Modified 3-element Wynne system
Length of the 2" barrel: 72 mm
Stop ring: 65 mm outer diameter, removable
Weight: ca. 230 g

 

 

Carrello  

Nessun prodotto

0,00 € Spedizione
0,00 € Totale

Carrello Check out

Contattaci