![Rack and Pinion 2.5" Focuser with M117x1 Rack and Pinion 2.5" Focuser with M117x1](https://www.teleskop-express.it/9054-large_default/rack-and-pinion-25-focuser-with-m117x1.jpg)
Rack and Pinion 2.5" Focuser with M117x1
Teleskop Service
- Rimuovi questo prodotto dai miei preferiti
- Aggiungi questo prodotto ai miei preferiti.
- Stampa
TS-Optics 2.5" Rack and Pinion Focuser with M117x1 Connection and 360° Rotation
TS-Optics 2.5" Rack and Pinion Focuser with M117x1 Connection and 360° Rotation
Codice articolo: TSFOCR25-117
The 2.5" focuser with rack and pinion driver is designed for amateur telescope making and upgrade of refracting telescopes, apos, ED, ...
Load capacity up to 4 kg
Ideal for astrophotography
Connection thread on the telescope side: M117x1 internal thread with 360° rotation
Connection on the eyepiece side: 2" and 1.25" receptacle with compression ring and M63x1 female thread
Shortest distance from M117x1 female thread to 2" receptacle: 102.5 mm
Shortest distance from M117x1 internal thread to M63x1 connection thread: 84.5 mm
Adjustment range of the extension tube: 103 mm
The draw tube and the adjustment can be clamped separately, thus preventing the draw tube from tilting when clamped
10:1 dual speed allows high precision focusing in astrophotography
Including finder shoe for standard finder bracket
Motor focus can be retrofitted
TS 2.5" Rack and Pinion Focuser for ATM and Telescope Upgrade
This focuser is superior to conventional Crayford focusers because bearing and adjustment are decoupled from each other. This allows a sensitive adjustment even with maximum load.
The rack and pinion gear drive:
A conventional Crayford focuser works with contact pressure. The weaker the pressure, the smoother the focuser, but there is always the risk of slipping, because adjustment and bearing are combined. This focuser is completely different:
The draw tube is fixed in place by ball bearings. The bearings are optimized to provide maximum stiffness. The adjustment of the extension tube is achieved by a helical toothed rack. The advantage is an absolutely jerk-free adjustment.
The clamping of the focuser position is also optimized. No clamping screw simply presses on the draw tube, but the position of the adjustment is fixed. Thus, the focus position is held 100%.
Easy adaptation to your telescope via the M117x1 connection thread:
The focuser has an M117x1 internal thread as connection on the telescope side. In addition, you can rotate the complete focuser by 360° to always have a comfortable focusing position. We will also be pleased to manufacture individual transition adapters for your telescope. Please note, however, that the clear aperture on the focuser side of your telescope must be at least 74 mm. This is the diameter of the draw tube with the gear rack.
We recommend the focuser especially for refractors (apos, ED, ...) with an aperture of 90 mm or more. The large travel allows extensive accessories. We also offer spacers with M117x1 internal and external thread.
Focuser type: Rack & Pinion focuser
Payload: 4 kg
Connection thread on the telescope side: M117x1 female thread
Connection on the eyepiece side: 2", 1.25" and M63x1 female thread
Shortest height from M117 threaded connection to 2": 102.5 mm
Shortest overall height from M117 thread connection to M63x1 internal thread: 84.5 mm
Diameter of the draw tube: 67.5 mm outer diameter + 3 mm gear rack
Adjustment range: 103 mm
Weight: 1270 g