ZWO-ADS

Codice articolo: ZWO-ANTI-DEW

• The anti-dew heater strip is used for anti-dew on the front window of the ASI cooled cameras
• ♦ Complete
• ♦ Easy to install
• ♦ You do not need an extra power supply

ZWO Anti-dew heater strip for cooled ASI Cameras
The anti-dew heater strip is used for anti-dew on the front window of the ASI cooled cameras. This kit includes the zip-tie, anti-dew heater strip, an Y power cord and two spacers.

The thickness of the anti-dew heater strip is 0.2~0.3 mm. The "Y" power cord is designed to connect in-line with the cooler power supply for convenience.

The thickness of the spacers is 0.3 mm and 0.5 mm. They are used for aligning the camera and EFW.

We recommend a 12 V DC adapter with at least 0.35 A, as the heating power on the strip is ~4.2 watts. You can use the same power cord to power both fan and heater simultanously, but make sure not to exceed the recommended amount of amperes.

How to use it:

♦ Tear out the protective film on adhesive tape.

♦ Put the anti-dew heater strip on the front facing of the camera and make sure the black cable is in the right position (lining next to the DC plug at the rear end).

♦ Tie the black cable with a zip-tie on the camera body.

♦ Plug in the power cord, then everything is done.

Technical data

Recommend: 12 V at 0.35 A
Heating Power: ca. 4.2 Watts
Thickness of spacers: 0.3 mm and 0.5 mm
Outer diameter of the heater: approx. 7.5 cm
Inner diameter of the heater: approx. 5 cm

In the box

♦ Anti-dew heater strip
♦ Zip-Tie
♦ Y power cord
♦ Two spacers