CR80

Codice articolo: CR80

• Stable, easily swivelling open metal clamps for an optimal connection between telescope and mount.

  Suitable for telescope tubes with 80 mm outer diameter
  Elegant and classy design
  Easy and quick mounting of the rings to the telescope
  Flat support surfaces on top and bottom, with a central 1/4" thread (female)
  Felt coating at the inner side prevents from scratches on the tube

• 
• Classy CNC tube rings with elegant design and uncompromising quality from TS Optics
  A beautiful telescope should be attached to the mount with the finest tube ring. Here, a beautiful appearance is as important as good technical properties. The CNC tube rings from TS meet these requirements.
  The tube is attached to the mount or the dovetail via a largely dimensioned support surface.
  The rings have identical support surfaces on top which allows attaching dovetail clamps or another dovetail bar.
  The rings can be folded open, thus the telescope can be removed from them within seconds.
  A thin layer of felt was applied to the inner side of the rings. This prevents from scratches. Nevertheless, the telescope tube is clamped very well in the rings and does not misalign. This is important if a guiding scope is attached to the rings

Technical Data

Inner diameter: 80 mm
Material: Aluminium anodized
Support surfaces: Flat support surfaces with 40 mm width
Threads: One 1/4" thread (female) on top and bottom
Thickness of the clamps: 18 mm