TS-Optics T-Ring M48 Adapter for Canon EOS R and RP Cameras

Codice articolo: M48-EOSR-L

The M48 adapter allows the connection of Canon EOS R and EOS RP system cameras to the telescope without T2 bottleneck

♦ Connection camera side: Canon RF mount, male

♦ Connection telescope side: M48x0.75 female thread

♦ Optical path 35 mm

♦ The camera sensor is exactly 55 mm away from the M48 female thread - ideal for most correctors

♦ The picture is similar.

TS T-Ring to M48 for Canon R Cameras
This adapter from the M48 thread (2" filter thread) to the EOS R mount allows a direct adaption from the M48 filter thread without the smaller T2 thread. This improves the illumination and makes the adaptation to correctors with M48 thread possible.

The adapter fits all cameras with the EOS R mount.

The T-Ring adapter is suitable for, among others:

♦ Skywatcher field flatteners and reducers for ED refractors (SKFlat80, SKFlat100, SKFlat120)
♦ Skywatcher coma corrector (Komakorrf4)
♦ Baader MPCC coma corrector
♦ TS, Tele Vue, Riccardi ... flatteners and correctors

Direct 2" connection with full aperture without T2 bottleneck
With the 2" extension ring TSVF230 you can adapt the T-ring directly to a 2" receptacle, without the T2 bottleneck. Of course, the TSVF230 again offers the 2" filter screw-in thread on the telescope side.

This allows you to attach your DSLR camera directly to 2" receptacle and have full illumination even for full frame cameras. You will find the 2" extension ring below under the "accessory recommendations".

Connection to correctors with the T2 thread:
The TST2-M48S adapter reduces the M48 female thread to T2 without optical path. This allows you to use the adapter also for correctors with T2 (M42x0.75) connection.

Specifiche tecniche:

Connection camera side: Canon RF mount
Connection telescope side: M48 (M48x0.75) internal thread
Diameter of the T-Ring after removing the M48 dovetail ring: 54.6 mm inner diameter
Length: 9.8 mm
Working distance T2 thread to sensor: 29.8 mm

TS T-Ring to M48 for Canon R Cameras
This adapter from the M48 thread (2" filter thread) to the EOS R mount allows a direct adaption from the M48 filter thread without the smaller T2 thread. This improves the illumination and makes the adaptation to correctors with M48 thread possible.

The adapter fits all cameras with the EOS R mount.

The T-Ring adapter is suitable for, among others:

♦ Skywatcher field flatteners and reducers for ED refractors (SKFlat80, SKFlat100, SKFlat120)
♦ Skywatcher coma corrector (Komakorrf4)
♦ Baader MPCC coma corrector
♦ TS, Tele Vue, Riccardi ... flatteners and correctors

Direct 2" connection with full aperture without T2 bottleneck
With the 2" extension ring TSVF230 you can adapt the T-ring directly to a 2" receptacle, without the T2 bottleneck. Of course, the TSVF230 again offers the 2" filter screw-in thread on the telescope side.

This allows you to attach your DSLR camera directly to 2" receptacle and have full illumination even for full frame cameras. You will find the 2" extension ring below under the "accessory recommendations".

Connection to correctors with the T2 thread:
The TST2-M48S adapter reduces the M48 female thread to T2 without optical path. This allows you to use the adapter also for correctors with T2 (M42x0.75) connection.

Specifiche tecniche: